Skip to content
مورد مصر MAWRED EGYPT

Cleaning machines

Cleaning machines are mains-powered, battery or push-operated equipment that scrub, dry, sweep and polish floors and wash carpets and outdoor surfaces with far less labour than manual cleaning. We supply them to hotels, hospitals, factories, malls and schools and help facility managers choose the machine type that fits the site's area and floors.

Updated

products
11

Catalogue

Quick comparison

ProductKey specSKU
Walk-behind scrubber dryer Scrubs and dries in one passFM-01
Ride-on scrubber dryer Seated operator, battery poweredFM-02
Single disc floor machine One disc for a brush or padFM-03
Marble polishing and burnishing machine High-speed rotation for polishingFM-04
Carpet and upholstery extractor Spray and extract, with hose and hand toolFM-05
Floor machine pads Colour-coded by abrasivenessFM-06
Floor blower air mover Low-level airflow with several speedsFM-07
Manual push sweeper Push-powered, no electricityFM-08
Ride-on sweeper Seated operator, hopper and dust filterFM-09
Two-bin street cleaner cart Two waste bins on two wheelsFM-10
High-pressure washer Electric, with pressure hose and spray gunFM-11

Cleaning machines in the range

Floor machines differ far more in how they work than in how they look. Some wash and dry the floor in one pass, some only sweep, and others are built for polishing or carpet care. Buying a type that does not match the task is the most common mistake with machines, so we always start from the task.

Machine How it runs Main job Suits
Walk-behind scrubber dryer Pushed by the operator Washes the floor and picks up the water in one pass Corridors, hospitals, offices, shops
Ride-on scrubber dryer Driven by a seated operator Washing and drying large areas Factories, malls, warehouses
Single-disc machine One rotating disc steered by hand Deep scrubbing, polishing, carpet shampoo Hotels, schools, offices
Marble polishing machine High-speed rotation on a polishing pad Bringing back the shine on marble and tile Hotel lobbies, office buildings
Carpet and upholstery extractor Sprays solution, then extracts it Carpet, sofas, fabric chairs Hotels, offices, event halls
Manual push sweeper Pushed, no power Collecting dust and dry debris Car parks, outdoor walkways
Ride-on sweeper Driven by a seated operator Sweeping large open areas Factories, logistics zones, yards
Pressure washer High-pressure water through a spray gun Washing outdoor surfaces and equipment Factories, car parks, central kitchens

We also supply the accessories these machines run with, such as single-disc pads and air movers for drying floors after washing, plus a manual street cleaning cart for crews working yards and internal roads.

Choosing the right machine

Begin with the area cleaned each day, not the floor area of the whole building. If it is limited and broken up by corridors and doors, a walk-behind scrubber is enough and moves easily between rooms. For one big open space, such as a production hall or a warehouse, a ride-on machine saves a clear amount of operator time and effort.

Next comes the floor itself. Ceramic tile, epoxy and sealed concrete suit scrubber dryers. Marble needs a different routine that starts with washing and ends with polishing. Carpet needs its own spray and extraction machine, since hard-floor machines do not work on it.

Then think about power. A corded machine is simpler to maintain but needs nearby sockets and limits how far the operator can go. A battery machine moves freely and is safer in busy places because there is no cable across the corridor, though it needs a charging spot and a clear routine for charging after every shift.

Practical points often missed

Noise matters in hospitals and hotels that run day and night, so ask about it before settling on a model. Storage matters too: a ride-on machine needs a room with a wide enough door, plus a water point and a drain nearby. Just as important is the person who will run it. The best machine loses its value if the team is not trained to fill and empty it and to clean the squeegee and brushes at the end of each shift.

Consumables and maintenance

Every machine has parts that wear and get replaced, such as brushes, pads, squeegee blades and filters. Count these into the purchase decision and order them with the machine from day one, so work does not stop at the first worn part. Use low-foam detergents made for machines, because excess foam can reach the motor and cause faults.

Frequently asked questions

What is the difference between a scrubber dryer and a single disc machine?
A scrubber dryer scrubs the floor and vacuums up the dirty water in one pass, so the floor is dry and walkable shortly after. A single disc machine scrubs or polishes with its rotating disc, and the water it leaves must then be picked up with a wet vacuum or a mop.
Is a battery machine better than a mains-powered one?
Not in every case. Battery suits busy areas and spaces where a cable is hard to run, while mains power suits work in defined areas near sockets and keeps maintenance simpler.
Do staff need training to run the machine?
Yes, even manual machines need short training on filling, emptying, choosing the brush or pad and cleaning the machine after use. Mention in your quote request if you need an operating briefing for the team at handover.
What information should I send to choose the right machine?
Send the approximate area cleaned each day, the floor types, whether there are power sockets nearby and the number of shifts. With that we propose the machine type and size in the quote.
Can a pressure washer be used on indoor floors?
It is not recommended indoors because it sprays water heavily and can reach electrical fittings and furniture. It belongs in yards, car parks and on equipment and container washing.

Need a quote for your facility?

Send your list of items and quantities and we reply with a written quote.