Walk-behind scrubber dryer
Scrubs and dries in one pass
Add to quote
SKU FM-11
A high-pressure washer pumps water at force through a hose and spray gun, removing built-up dirt, oil and mud from hard surfaces and equipment with less water than an ordinary hose. It suits factories, car parks, central kitchens, transport depots and compounds that wash yards, bins, vehicles and equipment.
Updated
Suitable for: Factory cleaning supplies، Mall and shopping centre cleaning supplies، Cleaning supplies for residential compounds
Not suitable for: Not for use inside offices and rooms or near electrical fittings, nor on fragile surfaces, fabrics, people or animals.
| Operation | Pump drives water at high pressure through a hose and gun |
|---|---|
| Power source | Mains cable |
| Water | Cold water from a standard supply |
| Attachments | Pressure hose, spray gun and nozzles with different spray angles |
| Mobility | On wheels for moving around the site |
| Pressure and flow rate | By model, confirmed in the quote |
| SKU | FM-11 |
Some dirt will not shift with a brush and mop: oil on car park floors, mud on vehicle wheels, food residue stuck to refuse bins and cold room floors. A high-pressure washer breaks this up with water force alone or with a suitable detergent, and does in minutes what would take long scrubbing. It is also used on stone facades, boundary walls and outdoor footpaths.
Start with the type of work. Light washing of vehicles and outdoor surfaces needs only a mid-range model. Regular washing of industrial equipment, workshop floors and bins calls for a heavy duty model built for continuous running. Next, look at water flow rate, since flow decides how fast loosened dirt is rinsed away, more than pressure alone. Then confirm there is a water supply and a safe power point where the work happens.
A narrow angle nozzle concentrates water on a small point and suits stubborn dirt, but it can damage delicate surfaces and paintwork. A wide angle nozzle spreads water over a larger area and suits rinsing and ordinary surfaces. Always begin with the widest angle and move closer gradually. Never aim close up at paint, joints or wood.
High-pressure water can injure if it hits the body, so the gun is never pointed at anyone. The operator wears non-slip boots, safety glasses and gloves. Keep the machine and its plug away from pooled water, and preferably connect through a socket protected by an earth leakage breaker. Switch off the power and release pressure from the gun before changing a nozzle or undoing the hose.
Describe exactly what the machine will wash, yards, vehicles, refuse bins or production equipment, and roughly how often each week. Say whether there is a permanent water supply and a suitable socket at the work spot, or whether the machine will move between places far apart. Note the main kind of dirt, oil, mud or food residue, since it decides the model, nozzles and detergent. With that we can propose a machine that stands up to your work without being oversized.
Scrubs and dries in one pass
Add to quoteSeated operator, battery powered
Add to quoteOne disc for a brush or pad
Add to quoteSend your list of items and quantities and we reply with a written quote.