Walk-behind scrubber dryer
Scrubs and dries in one pass
Add to quote
SKU FM-03
A single disc machine is a floor machine with one rotating disc that takes a brush or pad, steered by the operator from a tall handle to deep-scrub floors, polish them or shampoo carpet with the right brush. It is a multi-purpose machine for cleaning teams in hotels, schools, offices and hospitals that want one tool for several tasks.
Updated
Suitable for: Hospital cleaning supplies، Factory cleaning supplies، Mall and shopping centre cleaning supplies، Cleaning supplies for residential compounds
Not suitable for: It does not pick up water after scrubbing, so it needs a wet vacuum or mop, and it is not ideal for fast daily washing of busy corridors.
| Operation | Single rotating disc steered by the operator from a tall handle |
|---|---|
| Power source | Mains cable |
| Uses | Deep scrubbing, polishing, carpet shampooing and wax stripping |
| Attachments | Brush or pad driver, with a water or solution tank depending on the model |
| Suitable floors | Ceramic, marble, vinyl and carpet with the right brush |
| Disc size and power | By model, confirmed in the quote |
| SKU | FM-03 |
The value of a single disc machine is its flexibility. Change what is fitted under the disc and it goes from scrubbing tiles to polishing marble to shampooing carpet. A coarse pad strips stubborn soil and old wax, a fine pad polishes, and a dedicated soft brush shampoos carpet. That is why most hotel and school cleaning stores keep one.
A scrubber dryer washes and vacuums together. A single disc only scrubs or polishes, and the water stays on the floor until it is picked up with a wet vacuum or a mop. So the single disc is usually kept for periodic deep cleans and polishing, while a scrubber dryer handles daily washing. If the budget covers just one machine, start from the task you do most often.
Operators need a short period to get used to it, because the machine swings left or right when the handle is raised or lowered even slightly. Start in an open area until the operator has full control, and keep the cable behind them, never in front of the disc. Do not run it without a brush or pad fitted, and do not let it spin in one place on marble, where it can leave a mark.
Wash brushes and pads after use and hang them to dry. Check the cable and plug regularly, as the machine drags its cable across the floor the whole time it works. For carpet, use a low foam shampoo and let the carpet dry fully before reopening the room; a floor drying blower shortens that wait.
Do not order the machine on its own. Decide which jobs it will do, then order what each job needs. Periodic scrubbing takes a brush suited to the floor or medium pads. Stripping old wax takes coarse pads, polishing takes fine pads, and carpet washing takes the carpet brush. If the machine will scrub often, a solution tank makes life easier because the operator no longer has to splash water in front of the machine by hand. List those jobs in your quote request and we will match the accessories to the model.
Scrubs and dries in one pass
Add to quoteHigh-speed rotation for polishing
Add to quoteSend your list of items and quantities and we reply with a written quote.