Skip to content
مورد مصر MAWRED EGYPT

Window cleaning tools

Window cleaning tools are the squeegees, washer sleeves and scrapers cleaning staff use to wash and dry windows, glass facades and mirrors without streaks. We supply them to companies, hotels, malls, hospitals and cleaning contractors, and help buyers pick the right width and accessories for the size and height of the glass.

Updated

products
6

Catalogue

Quick comparison

ProductKey specSKU
Window squeegee Metal channel with replaceable rubberGL-01
Window washer sleeve Absorbent sleeve on a T-barGL-02
Glass scraper Replaceable blade with a safety coverGL-03
Rectangular window cleaning bucket Rectangular bucket that fits a full width washerGL-04
Squeegee replacement rubber Two-edged rubber strip, cut to channel widthGL-05
Combination window washer and squeegee Washer pad and rubber blade on one headGL-06

The core window cleaning tools

Professional window cleaning depends less on the chemical than on the tools and how they are handled. The method used in institutional cleaning is simple. The washer wets the glass with solution and loosens the dirt, the squeegee pulls the water off in even strokes, and the scraper deals with anything that washing leaves behind. Each tool has a job the others cannot do.

Tool Role What matters Suits
Window squeegee Pulling water off and drying the glass Metal channel with a replaceable rubber blade Windows, shopfronts, mirrors, shower screens
Strip washer Washing glass and lifting dirt Absorbent sleeve on a T-bar Facades, windows, large glass areas
Glass scraper Removing paint, stickers and hard deposits Replaceable blade with a safety cover Post-construction cleans, neglected frontage

Picking the right width

Squeegees and washers come in several widths. A wide one covers a big shopfront quickly but is awkward on small windows with lots of frames. A narrow one is easier on mirrors, shower screens and divided panes. A useful rule is to match the washer to the squeegee width, or go slightly wider, so every strip the squeegee pulls has already been washed. Tell us what glass you have and we suggest widths in the quote.

Height and telescopic poles

High glass over entrances, in lobbies and on lower facades can be reached from the ground with a telescopic pole that takes the squeegee, washer and scraper. In many cases that is safer than working from a ladder. External facades on tall buildings are another matter: they need access equipment and a system for working at height, which these hand tools do not cover.

Rubbers and sleeves wear out

The squeegee rubber decides the quality of the finish. A worn or nicked blade leaves lines however skilled the cleaner is, so it is changed regularly and spare rubbers go on the same order as the tools. Washer sleeves are laundered and replaced once damaged, and a spare sleeve per cleaner lets one be washed while the other is in use. Scraper blades are changed as soon as they go blunt, since a dull blade scratches glass instead of cutting cleanly.

Working tips

Avoid cleaning glass in direct sun where you can, because the solution dries before it is pulled off and leaves spots. Work from top to bottom and wipe the rubber edge with a cloth after each stroke. Measure the solution as the label says. Too much detergent leaves a sticky film.

Interior glass in hospitals and hotels

Hospitals and hotels clean interior glass, mirrors and glass partitions almost every day, and a microfibre washer with a small squeegee usually covers it. Facades and entrances need wider tools and a telescopic pole. It helps to state how many cleaners do each kind of work when you order.

Putting together a cleaner's kit

A basic kit for each window cleaner usually means a squeegee and a washer of about the same width, a bucket or tool belt, a microfibre cloth or chamois for the edges, a scraper when needed and a telescopic pole for high glass. Send us the number of cleaners, the type of glass and its height, and we propose a kit in the quote.

Frequently asked questions

What is the right order for using window tools?
Start with the washer sleeve soaked in cleaning solution to wash the glass, then pull the water off with the squeegee from top to bottom, and dry the edges with microfiber or chamois. Use the scraper before washing if there is paint or sticker residue.
Why does the squeegee leave streaks?
The usual cause is a worn or nicked rubber, or the solution drying before you pull. Replace the rubber, wipe its edge after each stroke and avoid working in direct sun.
Is a telescopic pole enough for external facades?
It is enough for high glass indoors and ground-floor exteriors. Facades on tall buildings need work-at-height equipment and a supervised system.
Do we need spare rubbers and sleeves with the order?
Yes, because rubbers and sleeves wear faster than the handle and channel. Ordering them with the tools from the start avoids downtime when they wear out.

Need a quote for your facility?

Send your list of items and quantities and we reply with a written quote.