Single-motor wet and dry vacuum
One motor for wet and dry pick-up
Add to quoteWet and dry vacuums are drum-type electric vacuums that pick up dust and dry debris and also draw up spills or water left after floor washing in one unit. We supply single-motor units for daily use in offices and hotels, and multi-motor units for factories, workshops and large areas that need stronger suction and a bigger tank.
Updated
One motor for wet and dry pick-up
Add to quoteMultiple motors, tank on a tilting trolley
Add to quoteDry pick-up only, bagged and quiet
Add to quoteWorn on the back with padded straps
Add to quoteBrush roll that cleans deep into the pile
Add to quote| Product | Key spec | SKU |
|---|---|---|
| Single-motor wet and dry vacuum | One motor for wet and dry pick-up | VC-01 |
| Industrial multi-motor wet and dry vacuum | Multiple motors, tank on a tilting trolley | VC-02 |
| Dry tub vacuum with dust bag | Dry pick-up only, bagged and quiet | VC-03 |
| Backpack vacuum cleaner | Worn on the back with padded straps | VC-04 |
| Upright carpet vacuum with brush roll | Brush roll that cleans deep into the pile | VC-05 |
A household vacuum is built for dust and light carpet. It cannot take water or long hours of continuous work. A wet and dry vacuum has a drum-style tank that takes water and debris together, a motor sealed off from the tank and a cut-off that stops suction once the tank fills with water, so nothing reaches the motor. That makes it the standard tool for in-house cleaning teams, and it is also used alongside a single-disc machine to pick up water after scrubbing.
| Type | Motors | Typical use | Suits |
|---|---|---|---|
| Single-motor wet and dry vacuum | One motor | Daily cleaning and spill pick-up | Offices, hotels, schools, clinics |
| Multi-motor industrial vacuum | Two or three motors | Heavy suction and large volumes of water | Factories, workshops, car parks, malls |
Begin with the debris. If the work is mostly dust and light waste with the odd spill, a single-motor unit is enough and is easier to carry between floors. If the team picks up scrubbing water from large halls or collects sawdust and industrial dust, a multi-motor machine fits better, with stronger suction and a bigger tank.
Then consider the tank material. Plastic tanks are lighter, do not rust and suit general use. Stainless tanks take knocks better and are easier to clean, which suits kitchens, factories and places that deal with coarse debris.
Think about emptying, too. A large vacuum full of water is heavy, and lifting the tank by hand strains the operator and can cause injury. Industrial vacuums therefore often sit on a tipping trolley that tilts the tank for emptying, or have a drain hose at the bottom. This deserves attention when choosing a model.
The filter protects the motor and stops fine dust going back into the air. When picking up water, remove the cloth filter or fit the water filter as the model's instructions say. When vacuuming fine dust, check that the filter is clean and undamaged. Vacuums usually come with a hose, tubes and nozzles for floors and corners, and extra tools for carpet or a rubber squeegee nozzle for water can be ordered.
Never use the vacuum on flammable materials, solvents or hot ash. Unplug it before opening the tank or changing the filter, and empty and rinse the tank at the end of each shift so it does not start to smell. Inspect the power cable and hose regularly, as small cracks weaken suction and can be dangerous around water.
Offices and hotels usually work with one vacuum per floor or per group of neighbouring floors, so cleaners do not lose time carrying a machine between lifts. In factories and car parks, one industrial vacuum per large work area is often enough, with a small one for the attached admin offices. A standby unit is useful for emergencies such as a sudden leak. Tell us the number of floors or zones and the type of work in each, and we propose numbers and placement in the quote.
Send your list of items and quantities and we reply with a written quote.