Industrial multi-motor wet and dry vacuum
Multiple motors, tank on a tilting trolley
Add to quote
SKU VC-01
A single-motor wet and dry vacuum is a light drum vacuum that picks up dust and dry debris and draws up spills with the same unit, supplied with a hose and floor and crevice nozzles. It suits daily use by cleaning teams in offices, hotels, schools, clinics and shops.
Updated
Suitable for: Hospital cleaning supplies، Hotel cleaning supplies، Office cleaning supplies
Not suitable for: Not for continuous pick-up of wash water from large halls, heavy industrial debris, flammable materials or hot ash.
| Motors | One motor |
|---|---|
| Use | Dust, dry debris and spill pick-up |
| Tank material | Plastic or stainless steel, depending on the model |
| Accessories | Hose, wands, floor nozzle and crevice nozzle |
| Power source | Mains cable |
| Tank capacity and power | By model, confirmed in the quote |
| SKU | VC-01 |
In most office buildings and hotels the daily jobs are mixed: dust under desks, grit in the carpet, a coffee spilt in a corridor, water left after washing a washroom. A single-motor wet and dry vacuum handles all of it with one light machine that a cleaner can carry between floors. It is also used after scrubbing floors with a single-disc machine, to pick up the remaining water.
A plastic tank is lighter and does not rust, the usual choice for offices, hotels and schools. A stainless tank stands up better to knocks and is easier to clean and disinfect, so it is preferred in kitchens, clinics and places that deal with rough debris or wash the tank often. Here the choice depends on the location more than on performance.
For wet pick-up, fit the filter meant for liquids or remove the cloth filter, as the model's instructions say. When going back to dust, dry the tank and filter first, because dust and moisture turn into mud that clogs the filter and weakens suction. Before picking up water, check that the shut-off that stops suction when the tank is full is working. It is what keeps water away from the motor.
In healthcare areas a cleaning machine must not blow fine dust back into the air, so keep an eye on the filter and replace it once it is damaged. Give each zone its own vacuum if you have isolation or high-sensitivity areas, and empty and wash the tank at the end of every shift.
Empty the tank before it fills. Shake or wash the filter, depending on its type. Check the hose for blockages and cracks, and coil the cable without yanking it from the plug. Habits like these keep suction strong for a long time.
Tell us where the vacuum will be used, offices, hotel rooms, clinics or a kitchen, and the rough balance between dry and wet pick-up. Say how many units you need, one per floor or one per cleaner. Mention the tank material you prefer if you have used one before, and whether you want extra nozzles or spare filters with the order.
Multiple motors, tank on a tilting trolley
Add to quoteSend your list of items and quantities and we reply with a written quote.