Skip to content
مورد مصر MAWRED EGYPT
Glass scraper

SKU GL-03

Glass scraper

A glass scraper with a replaceable blade that removes paint, cement, stickers and hard marks from glass without scratching it when used correctly. It suits post-construction cleaning teams, cleaning contractors and buildings cleaning neglected facades or glass with adhesive residue.

Updated

SKU
GL-03
Category
Window cleaning tools
Request a quote

We reply with a written quote after reviewing your request.

Suitable for: Hotel cleaning supplies، Office cleaning supplies، Mall and shopping centre cleaning supplies، Cleaning supplies for residential compounds

Not suitable for: Not for coated or filmed glass, reflective film or painted glass, and not for plastic or acrylic, which it scratches.

Specifications

BladeReplaceable metal blade
SafetyCover or retracting mechanism to protect the blade when idle
HandleShort metal handle, or telescopic fitting depending on the model
UseRemoving paint, cement and stickers from glass
SparesSpare blades ordered with the scraper
VariantsBy model, confirmed in the quote
SKUGL-03

When you need a glass scraper

Some marks will not come off however many times the glass is washed: paint spots after fit-out, cement splashes, sticker and tape residue, hardened bird droppings on facades. This is the scraper's job. Its sharp blade lifts the residue off smooth glass without resorting to strong solvents. It is a basic tool in post-construction cleaning and in bringing long-neglected facades back into shape.

Short handle or telescopic

A short handle gives the cleaner more control over angle and pressure, and suits small marks and careful work close to frames. A scraper that fits a telescopic pole reaches high glass and covers large areas. Many post-construction crews use both.

Avoiding scratches

Ordinary glass tolerates the blade when it is used correctly; used wrongly it leaves scratches that cannot be removed. First, wet the glass with cleaning solution before scraping, because scraping dry glass drags grains of sand across the surface. Second, hold the scraper at a low angle and push forward only, never pulling it back over the glass. Third, change the blade as soon as it dulls or shows any burr. Before tackling a whole facade, try it on a small hidden corner.

Glass it must not be used on

Keep it off glass with reflective or insulating film, painted glass or glass with special coatings, and off acrylic and clear plastic. If you are not sure what glass you have, check with whoever manages the building before you start.

Safety

The blade is extremely sharp, so retract or cover it the moment the work is done, and never leave it loose in a pocket or tool bucket. Put old blades in a closed container kept for that purpose so they cannot cut refuse collectors, and wear suitable gloves when changing a blade.

What to write in your quote request

Describe the job, post-construction cleaning or routine maintenance, the glass type and height, the number of cleaners and how many spare blades you want.

Alternatives

Frequently asked questions

Does the scraper scratch glass?
Not on ordinary glass if it is wet and the scraper is held low, pushed one way, with a sound blade. Scratches usually come from scraping dry glass or using a damaged blade.
Can it be used on glass with reflective film?
No, the blade cuts and lifts the film. Filmed glass should be cleaned with a washer and squeegee only.
When should the scraper blade be replaced?
Replace it when it dulls, chips or rusts, because a damaged blade scratches glass. In post-construction cleaning this happens often.
Request a quote

Need a quote for your facility?

Send your list of items and quantities and we reply with a written quote.