Window squeegee
Metal channel with replaceable rubber
Add to quote
SKU GL-06
A combination window tool carries an absorbent washer pad on one side of its head and a rubber blade on the other, so the cleaner washes the pane with one face, turns the head and pulls the water off with the other without changing tools. It suits high glass cleaned from the ground on a telescopic pole, shopfronts, and glass partitions in offices, schools and clinics.
Updated
Suitable for: Hospital cleaning supplies، Office cleaning supplies، School and university cleaning supplies، Mall and shopping centre cleaning supplies
Not suitable for: It does not give the precision of a separate squeegee on professional facade work, and is not right for heavily soiled glass that needs a fully loaded washer and repeated scrubbing.
| Head | Two faces: absorbent pad and rubber blade |
|---|---|
| Washer pad | Microfibre or mesh-covered sponge, depending on the model |
| Handle | Short handle that fits a telescopic pole |
| Spares | Pad cover and rubber replaceable on most models |
| Use | High windows, shopfronts and glass partitions |
| Head width | By model, confirmed in the quote |
| SKU | GL-06 |
Cleaning a high window the usual way means fitting the washer to the pole and wetting the pane, then lowering the pole, taking the washer off, fitting the squeegee and raising the pole again. Meanwhile, in hot weather, the solution has begun to dry on the glass. A combination tool removes that whole cycle. The cleaner gives the pole a half turn where he stands and moves from washing to pulling in a second, while the glass is still wet.
A general cleaner who does the reception glass and partitions as one task among many, and is no window specialist, gets a single simple tool that needs no tool belt. A shop owner or school supervisor who wants a short kit for staff can manage with this, a bucket and a telescopic pole. Specialist facade teams keep it as a helper for high spots and rely on a separate washer and squeegee for precise work.
Its pad is thinner than a stand-alone washer sleeve, so it holds less solution and needs dipping more often on large panes. The rubber sits at a fixed angle to the head, so the cleaner cannot adjust it with the wrist as with a separate squeegee, and thin lines can remain at the edges to be wiped with a cloth. Anyone who knows these limits in advance uses the tool where it belongs and does not expect what it was not made for.
Dip the pad face in the solution and press it lightly against the bucket rim so it does not drip on you. Wash the pane from top to bottom, going into the corners. Turn the pole so the rubber faces the glass, and pull down from the top in overlapping vertical strokes at constant pressure. After each stroke, lower the tool and wipe the rubber. Finally dry the bottom edge and the frame with a microfibre cloth fixed to the pole, or by hand where you can reach.
Wash the pad after each working day and leave it to dry. A pad left wet in the bucket picks up a smell and carries dirt onto the glass the next day. Inspect the rubber as on any squeegee and change it when lines appear. Store the tool hanging up or resting on its pad side, so that its weight never sits on the rubber edge.
Give the greatest height of glass cleaned from the ground, and whether you already have telescopic poles or need them with the tools. Describe the main kind of glass: a shopfront, internal partitions or building windows. Add the number of tools, and whether you want spare pad covers and rubbers with them.
Metal channel with replaceable rubber
Add to quoteAbsorbent sleeve on a T-bar
Add to quoteSend your list of items and quantities and we reply with a written quote.