Window squeegee
Metal channel with replaceable rubber
Add to quote
SKU GL-05
Squeegee replacement rubber is a straight rubber strip with two sharp edges that slides into the squeegee's metal channel in place of a worn blade, restoring a clean pull without buying a new squeegee. It is ordered by housekeeping managers in hotels, office buildings and malls, and by facade cleaning contractors who go through rubber regularly.
Updated
Suitable for: Hotel cleaning supplies، Office cleaning supplies، Mall and shopping centre cleaning supplies
Not suitable for: It does not fit floor squeegees with thick foam rubber, cannot rescue a squeegee whose channel is bent or handle is broken, and will not suit channels that do not match its profile.
| Form | Straight strip with a top bead that locks in the channel |
|---|---|
| Edges | Two working edges, the blade is flipped to use the second |
| Hardness | Soft, medium or hard, depending on the model |
| Supplied as | Pieces pre-cut to squeegee width, or a roll cut as needed |
| Compatibility | Must match the channel profile, checked before ordering |
| Lengths and thickness | By model, confirmed in the quote |
| SKU | GL-05 |
The handle can be sound, the channel straight and the cleaner skilled, and the window still comes out streaked because the rubber edge has gone dull. The rubber is the only part of a squeegee that touches the glass, and it is also the only part that wears. Professionals treat it the way they treat cutting blades: a small permanent supply in the cleaner's bag and an immediate change at the first sign of weakness, with no wait for a new purchase order.
A strip has a lower edge that does the work and another edge held in reserve on the opposite side. When the first starts leaving lines, pull the strip out of the channel, turn it over and slide it back in, and the second edge takes over as if the rubber were new. Each piece lasts twice as long that way. Point this out in training, because a lot of rubber is thrown away with one edge never used.
Soft rubber grips glass well in cool weather but turns too soft in summer heat, which makes the pull heavy and wears the edge fast. Hard rubber glides easily over hot glass on sunlit facades and loses some flexibility in winter cold. A medium grade handles most indoor work all year round. Teams working on exterior facades in summer would do well to try the harder grade.
Cut the strip with sharp scissors or a cutter in one square stroke, leaving it a touch longer than the channel at each end so it reaches the frame edge. Remove the old rubber after releasing the clip or screw, depending on the channel type. Feed the new strip in from one end, pull it gently so it lies straight without ripples, then lock it again. A strip that sits wavy in the channel streaks even when it is brand new.
Keep rubber laid flat or in its original coil, in a shaded place away from heat and solvents. Sun and hot air dry it out and crack the edge before it is ever used, and a sharp fold leaves a permanent mark at that point. For that reason it makes little sense to store more than a few months' consumption.
List the widths of the squeegees you use and how many of each, and the channel type if you know it, or send a photo of its cross-section. Say whether the work is indoors or on exterior facades, and whether you prefer pre-cut pieces or a roll the cleaner cuts from. Give the number of cleaners so we can estimate a quantity that matches your consumption.
Metal channel with replaceable rubber
Add to quoteWasher pad and rubber blade on one head
Add to quoteSend your list of items and quantities and we reply with a written quote.