Skip to content
مورد مصر MAWRED EGYPT
Floor machine pads

SKU FM-06

Floor machine pads

Floor pads are synthetic fibre discs fitted under a single disc or polishing machine, and their colour shows how abrasive they are, from heavy stripping to fine polishing. Every cleaning team with a floor machine needs them, because the pad is the consumable that decides the result.

Updated

SKU
FM-06
Category
Cleaning machines
Request a quote

We reply with a written quote after reviewing your request.

Suitable for: Factory cleaning supplies، Mall and shopping centre cleaning supplies، Cleaning supplies for residential compounds

Not suitable for: Not for carpet or hand use without a machine, and dark pads should not be used on polished marble for routine care.

Specifications

MaterialCompressed synthetic fibres with abrasive grade by colour
FittingFits the pad driver under a single disc or polishing machine
Colour systemBlack for stripping, red for routine cleaning, white for polishing
UseScrubbing, polishing and wax stripping on hard floors
SizesMatched to the machine base size, confirmed in the quote
SKUFM-06

Reading pad colours

Floor pads follow a widely used colour code, and the general rule is that darker means more abrasive. Black is the most aggressive, used for stripping floors and removing old wax and built-up soil. Red is medium, the usual choice for routine cleaning and light scrubbing with a single disc. White is fine, used for polishing and restoring shine on marble and finished floors. You will find other colours between these grades; what matters is that the team knows which colour belongs to which job.

Matching the pad to the floor

Polished marble scratches easily, so keep black pads off it except in a restoration job supervised by someone who knows what they are doing. Epoxy and vinyl need a medium pad for scrubbing and a fine one for polishing. Matt ceramic tolerates a coarser pad when you are lifting stubborn stains. If unsure, try the pad in a hidden corner before working the whole area.

Matching the size to the machine

The pad diameter must match the pad driver on the machine. A pad that is too small lets the edge of the driver rub on the floor. One that is too big buckles at the rim and cleans unevenly. Tell us your machine model or its base size in the quote request and we will match the diameter.

Making pads last

Turn the pad over when one face is loaded with dirt, since every pad has two working sides. Rinse it with water after use and let it dry hanging up or lying flat, out of direct sun. Replace it once it gets thin or the edges tear, because a worn pad lowers the machine's performance and can mark the floor.

What to write in your quote request

Give your machine type or base size, the colours you use and a rough quantity of each. If you do not have a clear system yet, describe the floor types and the jobs the machine does, routine scrubbing, wax stripping or polishing, and we will propose a set. Order enough to cover a sensible period of use, so the team never stops polishing, or reaches for a wrong-grade pad, because the right colour ran out in the store.

Alternatives

Frequently asked questions

How many pads do I need with the machine?
Most teams keep a set of each colour they use, with spares of the colour used most. The quantity depends on the area and how often you scrub and polish.
Can the same pad be used on different floors?
Yes if the grade suits both floors, but wash it in between so it does not carry grit from a rough floor onto a polished one.
Do the pads fit a scrubber dryer?
Many scrubber dryer models accept a pad driver instead of a brush. Tell us your machine type so we confirm compatibility in the quote.
Request a quote

Need a quote for your facility?

Send your list of items and quantities and we reply with a written quote.