Skip to content
مورد مصر MAWRED EGYPT
Floor wax and polish

SKU DT-18

Floor wax and polish

A liquid floor wax and polish that is spread on a clean floor in thin coats to build a glossy protective layer that reduces scuffs and stains and makes daily mopping easier. It suits hospitals, schools, malls and office buildings with vinyl, terrazzo or marble floors that want a lasting shine.

Updated

SKU
DT-18
Category
Detergents and cleaners
Request a quote

We reply with a written quote after reviewing your request.

Suitable for: Hotel cleaning supplies، Office cleaning supplies، Factory cleaning supplies، Restaurant and cafe cleaning supplies، School and university cleaning supplies، Cleaning supplies for residential compounds

Not suitable for: Not meant for glazed porcelain or ceramic, where it does not bond well, for unsealed wood, or for outdoor areas that stay wet.

Specifications

FormReady to use or concentrated, depending on the product
Suitable floorsVinyl, terrazzo, marble and rubber floors
ApplicationThin coats with a clean mop, each left to dry as directed on the label
BuffingCan be buffed with a single disc machine, depending on the product
RemovalRemoved with a dedicated stripper when it builds up
PacksBy product, confirmed in the quote
SKUDT-18

What floor wax actually does

Wax is a thin coat that sits on top of the floor and takes the wear from shoes, trolley wheels and chairs in place of the floor itself. When the coat wears down it is renewed, and the floor underneath stays protected. That is why it is common in hospital corridors, schools and shopping centres, where traffic is heavy and floors are vinyl or terrazzo.

Preparing the floor

The result depends more on how clean the floor is than on the product. It must be completely free of dust, grease and cleaner residue, and fully dry. If an old wax layer is dirty or patchy, strip it first with a wax remover and rinse well. Any dirt left under the new coat later shows as dark patches that will not come out.

Applying it properly

Use a clean mop kept only for wax, never the daily mopping one. Lay a thin, even coat in sections, starting at the far corner and working back towards the door so you never walk on wet finish. Let each coat dry fully, as the label directs, before the next. Several thin coats shine better and last longer than one thick one.

Buffing and care between recoats

Once dry, some types can be buffed with a single disc machine and a polishing pad to raise the gloss. For daily mopping use a neutral cleaner at a light dilution, because strong cleaners dissolve the wax and dull it quickly. On marble, machine polishing is sometimes a better choice than wax, depending on the finish you want.

Safety

Put out wet floor signs and close the corridor during application and drying, because wet wax is extremely slippery. Work with good ventilation, keep the container closed and away from children, and do not mix it with any cleaner.

For your quote request

Give the floor type and approximate area, and tell us whether you already have a buffing machine and a wax stripper.

Alternatives

Frequently asked questions

How many coats do we need?
It depends on the floor type, traffic and the product, and the label usually suggests a number. As a rule several thin coats beat one thick coat.
Does it make the floor slippery?
A correctly applied and fully dried coat is not slippery in normal use. The risk is during application and before full drying, so close the area and put up warning signs.
When should the wax be stripped and reapplied?
When the surface stays dull after buffing or dark patches show under the coat. At that point strip the old layers with a wax stripper and apply fresh coats.
Request a quote

Need a quote for your facility?

Send your list of items and quantities and we reply with a written quote.