Scented floor cleaner
Concentrated liquid, diluted with water
Add to quote
SKU DT-15
A neutral liquid cleaner for marble and stone floors that is diluted with water and cleans polished and honed stone without etching the marble or dulling its shine. It suits hotels, office towers, hospitals and mosques with large areas of marble, granite and natural stone.
Updated
Suitable for: Hotel cleaning supplies، Office cleaning supplies، Factory cleaning supplies، Restaurant and cafe cleaning supplies، School and university cleaning supplies، Cleaning supplies for residential compounds
Not suitable for: It does not remove heavy limescale, rust stains or scratches, and it cannot restore shine to marble that has lost its polish; that needs machine grinding and polishing.
| Form | Neutral liquid, diluted with water |
|---|---|
| Suitable floors | Marble, granite, natural stone and terrazzo |
| Use | Hand mopping or scrubber dryer as directed on the label |
| Rinsing | Usually no rinse needed at the correct dilution |
| Packs | By product, confirmed in the quote |
| SKU | DT-15 |
Marble is a calcareous stone that reacts quickly with acid. Any acidic cleaner, even a mild one, leaves dull patches on polished marble that look like water marks and will not wipe away. People in the trade call this etching, or burning the marble. Strong alkaline cleaners cause a different problem by leaving a film that attracts dirt. Where a building has invested in stone floors, the daily mopping product should be neutral and made for stone.
Start by removing sand and grit with a dry mop or dust mop, since sand tracked in at entrances is the main cause of scratches on marble. Then dilute the cleaner as the label says and mop with a clean, well wrung mop. Change the bucket water as soon as it turns cloudy: dirty water puts the soil back down and kills the shine. In large halls the same dilution works in a scrubber dryer.
Granite is tougher than marble, but a neutral cleaner still suits it because it leaves no streaks on a polished surface. Honed natural stone and stone paving in outdoor walkways hold dirt in their pores, so they may need an occasional scrub with a brush or a single disc machine, using the same product.
If marble in the main corridors has lost its gloss or shows clear scratches, a cleaner will not bring it back. That calls for grinding and polishing with a marble machine. Afterwards the neutral cleaner keeps the result looking good for as long as possible.
Do not mix it with bleach, descalers or any other cleaner. Wet marble is very slippery, so put out a wet floor sign while you work. Store the closed container out of reach of children.
List the type of stone in each area with its approximate size, and say whether the floors are mopped by hand or by machine.
Concentrated liquid, diluted with water
Add to quoteGlossy protective coats for hard floors
Add to quoteSend your list of items and quantities and we reply with a written quote.