Skip to content
مورد مصر MAWRED EGYPT
Microfiber strip mop head

SKU MP-02

Microfiber strip mop head

A microfiber strip mop head with microfiber bands that fits a mop clip and is wrung in a trolley or bucket wringer. It suits hospitals, clinics, offices and hotels that need mopping which traps fine dust and dries quickly.

Updated

SKU
MP-02
Category
Mops and floor squeegees
Request a quote

We reply with a written quote after reviewing your request.

Suitable for: Hospital cleaning supplies، Hotel cleaning supplies، Factory cleaning supplies، School and university cleaning supplies، Cleaning supplies for residential compounds، Cleaning supplies for clubs and gyms

Not suitable for: Not suited to very rough floors such as untreated concrete or asphalt, which tear the strips quickly.

Specifications

MaterialMicrofiber strips fixed in a band
OperationManual wet mopping with wringing
FittingClamps into a mop clip on a handle
WringingWorks with press wringers on trolleys and buckets
Suitable floorsVinyl, ceramic, porcelain and marble
Sizes and coloursBy model, confirmed in the quote
SKUMP-02

What makes microfibre different

Microfibre strands are far finer than cotton, so they pick up fine dust, hair and soil instead of pushing it across the floor. The head is also lighter and dries faster after washing, which cuts odours and makes it easier to rotate heads between shifts.

Why hospitals prefer it

In hospitals the aim is to stop dirt travelling from one area to another. Microfibre makes colour coding easy because heads come in several colours depending on the model: one colour for washrooms, another for patient rooms, a third for corridors. With a double bucket, the mopping water also stays clean for longer. Choosing the disinfectant and how it is used remains the job of the facility's infection control team.

Using it correctly

Use the mop damp, not wet, so wring it thoroughly first. Avoid products containing ingredients that clog the fibres, such as fabric softener, because they reduce pick-up. Always start from the far side of the room and work towards the door.

Washing and care

Wash microfibre with water and ordinary detergent, and preferably not together with cotton, because cotton lint sticks in the fibres. Let it air dry or tumble at moderate heat; high heat damages the fibres.

What to put in the order

State the number of cleaners, your colour system and the type of clip or wringer you use. Each cleaner should ideally have more than one head per colour, so one can be washed while another is used during the same shift.

How many heads you need

Because microfibre dries quickly, heads can be rotated between shifts without sitting damp in the store. Even so, each colour zone needs enough heads of its own, and a washroom head should never be lent to another zone when stock runs short. The order is therefore worked out as the number of cleaners multiplied by the number of zones each one covers, plus a reserve for washing. Send us those figures and we will suggest a quantity in the quote.

Alternatives

Frequently asked questions

Does a microfiber mop work with a standard trolley wringer?
Yes, it works with the usual press wringers on trolleys and buckets. Just check that the clip holding the head suits the band width.
Does microfiber replace disinfectants?
No. Microfiber picks up soil well, but it does not replace the cleaner or disinfectant your facility protocol specifies. Use it with your approved solution according to the label.
How many washes does a head last before replacement?
It depends on the washing method and daily use. When the strips mat down or clearly pick up less, it is time to replace them.
Request a quote

Need a quote for your facility?

Send your list of items and quantities and we reply with a written quote.