How to choose the right hand dryer for your washrooms
For washrooms with peak-time queues, a jet dryer is the best fit because it dries faster. For quiet washrooms where noise matters, such as offices and clinics, warm air is enough, and for public, vandal-prone sites choose a stainless steel body.
Written by Mawred Egypt technical team, Procurement and product team at Mawred Egypt
Published · Updated
The types compared in one table
| Criterion | Warm air | Jet | Stainless warm air | Paper towels |
|---|---|---|---|---|
| Drying speed | Medium | Fast | Medium | Instant |
| Noise | Fairly quiet | Louder | Fairly quiet | Silent |
| Touch | Touch-free | Touch-free | Touch-free | Depends on dispenser |
| Vandal resistance | Medium | Medium | High | Dispenser can break |
| Running cost | Electricity only | Electricity only | Electricity only | Paper bought continually |
| Maintenance | Filter cleaning | Filter cleaning and emptying the water tray | Filter cleaning and wiping the metal surface | Refilling and emptying the bin |
| Best traffic level | Moderate | High | Moderate to high | Any, with a cleaner checking |
How many people use the washroom at the peak?
The choice depends on how many people use the washroom at the same moment more than on the daily total. An administrative office can have a lot of staff, but their washroom visits spread across the day, so one warm-air dryer is plenty. A factory where a whole shift finishes at once, a restaurant at lunchtime or a university building between lectures are all places where users arrive together. If the dryer is slow, the queue grows and people leave with wet hands that they wipe on their clothes or the door, which defeats the point of fitting a dryer.
In that case a jet dryer is the answer, or two warm-air dryers instead of one if the wall space allows.
Does noise matter to you?
A jet dryer is clearly louder because its airflow is stronger. Nobody notices in a factory or mall washroom. In a clinic, an office whose door faces the washroom, or a washroom next to a meeting room, the noise becomes a nuisance, and a warm-air dryer is the better fit even if it is a little slower.
Hygiene and infection control
All the dryers we supply are automatic with a sensor, so there is no button for users to touch. A jet dryer collects water in a tray instead of letting it drip on the floor, but that tray becomes a problem unless it is cleaned every day. A warm-air dryer has no tray, though drops may fall beneath it, so think about the floor surface.
In hospitals, any type works for visitor and staff washrooms and corridors. For isolation areas, operating theatres and hospital kitchens, follow your approved infection-control policy, as some policies require paper towels there. The same applies to restaurant kitchens and food preparation areas.
Do paper towels still have a place?
Yes. They need no power, make no noise and dry hands instantly. The downside is a constant purchasing line, plus a cleaner to refill the dispenser and empty the bin, and once the bin is full paper ends up on the floor. Many buildings therefore use both: a dryer for everyday use and a towel dispenser by the basin for those who prefer it.
Running cost over time
Leaving figures aside, the logic is simple. A dryer's main cost is paid once, at purchase and installation, and after that it comes down to electricity and light maintenance. Paper towels cost less up front, but the cost continues with every use and rises as the washroom gets busier. A jet dryer draws more power while running but runs for less time per user, so how it compares with a warm-air dryer depends on the model. We give the power rating of each model in the quote so you can work it through with your site engineer.
Maintenance to plan for
- A daily external wipe as part of washroom cleaning, with a cleaner suited to the casing material.
- Regular cleaning of the air intake and filter, since dust weakens the airflow and makes the motor run hotter.
- Jet dryers: empty and disinfect the water tray daily, and more than once a day at very busy sites.
- Stainless models: wipe along the brushed grain and avoid steel wool and concentrated chlorine.
Electrical installation notes
A dryer is an electrical appliance mounted in a wet room, so installation has to be done properly. Have an electrician provide a fixed power point beside the dryer position, on a circuit with its own breaker and an earth, and never plug the dryer into an exposed socket next to the basin. If you are fitting more than one dryer in the same washroom, the electrician should confirm the circuit can carry the load, particularly with jet dryers.
Then think about the position. The dryer should be close to the basin so water does not drip along the way, without sitting directly above it. The height has to suit the users, which matters most in schools. The wall must also hold the fixing: plasterboard needs suitable anchors or reinforcement.
Summary
Send us the number of washrooms with a short description of each: who uses it, when it gets busy, the wall type and whether a power point is already in place. We recommend a model for each washroom and confirm dimensions and power ratings in the written quote.