Disposable plastic apron
Polyethylene with neck and waist ties
Add to quote
SKU GM-12
A single-use isolation gown in non-woven fabric with long sleeves and elastic cuffs, tied at the back of the neck and waist. It suits hospitals, clinics, labs and sterile rooms, and visitors to departments that require protective clothing.
Updated
Suitable for: Hospital cleaning supplies، Factory cleaning supplies، Restaurant and cafe cleaning supplies
Not suitable for: It is not chemical protective clothing, and does not suit work that needs full body protection including the back, legs and head, which calls for a protective coverall.
| Material | Non-woven fabric, some models with a fluid-resistant layer |
|---|---|
| Sleeves | Long with elastic wrist cuffs |
| Fastening | Ties at the back of the neck and waist |
| Use | Single use |
| Pack | Individually wrapped or packed depending on the model |
| Sizes and colours | By model, confirmed in the quote |
| SKU | GM-12 |
An isolation gown is an outer layer worn over work clothes, covering the body from the neck to below the knees, arms included. It stops contamination passing from the patient or the environment to the wearer's clothes, and from the wearer to the patient or a clean area. Being single use, it is discarded on leaving the room or finishing the task.
In isolation rooms, hospital wards and clinics, labs and sterilisation rooms, and by visitors entering departments that require it. Some food and pharmaceutical plants issue gowns to visitors and technicians going into production areas. In each facility the infection control lead decides when a gown is needed and which type.
Gowns differ in material and in whether they have a fluid-resistant layer. A light gown is fine for visits and tasks where no splashing is expected. Tasks that may expose the wearer to fluids need a model with a resistant layer. Describe the use in your request and we will suggest a model and confirm its specification in the quote.
The gown should cover the body from neck to below the knees, with the ties fastened behind the neck and at the waist. Gloves then go on over the elastic cuffs so the wrist is never exposed. A gown left open at the back or only half tied does not do its job.
Removal matters more than putting it on. Untie or break the ties, pull the gown forward off the shoulders and fold it with the outer face inwards, then drop it in the designated waste container. Gloves come off with the gown or after it, depending on the department's procedure, followed by handwashing.
A gown covers the front, sides and arms, and goes on and off quickly. A coverall covers the whole body, back and legs included, usually with a hood. If the job needs full coverage, choose the coverall.
Keep gowns in their sealed packs in a clean, dry place away from heat, and stock them at room entrances beside the gloves and masks.
Give the departments and type of use, whether fluid resistance is needed, the sizes required and monthly consumption.
Polyethylene with neck and waist ties
Add to quoteOne piece with hood and zip
Add to quoteSend your list of items and quantities and we reply with a written quote.