Skip to content
مورد مصر MAWRED EGYPT
Stainless steel polish

SKU DT-08

Stainless steel polish

A stainless steel polish that removes fingerprints, hand marks and water spots from stainless surfaces and leaves a glossy film. It suits hotels, hospitals, malls and restaurants with stainless lifts, kitchens, appliances and panels.

Updated

SKU
DT-08
Category
Detergents and cleaners
Request a quote

We reply with a written quote after reviewing your request.

Suitable for: Hotel cleaning supplies، Office cleaning supplies، Factory cleaning supplies، Restaurant and cafe cleaning supplies، School and university cleaning supplies، Cleaning supplies for residential compounds

Not suitable for: Does not remove heavy grease or rust, and is not for direct food-cutting surfaces.

Specifications

FormSpray
UseRemoving fingerprints and water spots and polishing stainless steel
Suitable surfacesLift doors and walls, stainless appliances, kitchen fronts and handrails
MethodSprayed on a microfibre cloth and wiped along the grain
SizeBy product, confirmed in the quote
SKUDT-08

Why stainless steel needs a polish

Stainless steel is everywhere in lifts, commercial kitchens, waste bins and handrails, and it shows every fingerprint and hand mark. Ordinary cleaner removes dirt but leaves marks as it dries, so a lift or fridge looks dirty again minutes after cleaning. A polish removes these marks and leaves a thin film that makes new fingerprints less visible and the next clean easier.

The right method

Always start by removing dirt and grease with a suitable cleaner, then dry the surface, because polish does not cut grease. Next, spray the polish onto a clean microfibre cloth, not straight onto the surface, and wipe along the grain of the metal. Circular or cross-grain wiping leaves visible marks on brushed stainless. Finish with a second dry cloth to spread the film and buff it.

Where it is used on site

In hotels and hospitals the lift comes first, because its doors and inside walls are touched all day. Next are kitchen and cafeteria appliances such as fridges, ovens and the outside of work tables, then stainless bins, handrails and handles at entrances. Put lifts and entrances on a daily schedule and appliances on one that follows how much they are used.

Food-contact surfaces

Stainless food preparation tables are cleaned and sanitised under your food safety rules, and polish does not go on the cutting area itself. Use polish on appliance exteriors and fronts only, unless the label says otherwise.

What to keep off stainless steel

Do not use bleach or acidic limescale removers on stainless steel; they can leave dark stains or rust-like marks. Avoid steel wool and rough sponges on polished surfaces too. They leave permanent scratches that no polish will hide.

Safety and storage

Keep aerosol cans away from heat and direct sun and do not puncture them, even when empty. Use the product in a well-ventilated space and keep the spray away from your face.

For your quote request

Give the number of lifts in the building, the main stainless appliances in your kitchens, and how many staff will use the product.

Alternatives

Frequently asked questions

Does it remove rust from stainless steel?
No, the polish is for fingerprints, water spots and shine only. Brown rust-like marks need different treatment and often appear on lower grades or after bleach was used on the steel.
Should it be sprayed straight onto the lift door?
It is better to spray the cloth first, because direct spraying leaves runs and the mist can reach buttons and electronics. Wipe along the grain.
How often should it be used on lifts?
In busy buildings a lift usually needs wiping at least daily, more at peak times. The supervisor sets the schedule according to building traffic.
Request a quote

Need a quote for your facility?

Send your list of items and quantities and we reply with a written quote.